The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares G5 Convert T3 T4 1000 SP Cali 2 Fuel and Carburettors

Sort by Title

Sort by Price

Page 6 of 9

1 2 3 4 5 6 7 8 9

Dellorto Mixture Screw PHF and PHM

FUA60854 Fits 1100 Sport Carb, Cali 1100 (Carb), 850/1000 ALL Models

Dimensions:
5mm tip, 14mm shaft, 7mm threaded section

Dellorto mixture screw for PHF36 and PHM40 carbs

Check your mixture screw length as Guzzi used two lengths, this one and the screw in kit FUA93936

part in stock 4 in stock

30936210 GU30936210 30 93 62 10
3093 6210 3093.6210 30.93.62.10

£10.90

INC VAT

£9.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Needle Valve

FUA45590 Fits V7 Special (1969-1971), 850 GT, 750S, S3, 850T, T3, T4, T5 Series 1 & 2, 1000 SP, Convert, G5, Cali 2, V50, V35, V35 II, Imola, V35C, V35 3, V35 TT

Dellorto needle valve

Needle valve kits not available for the VHB 30 as the seat is part of the carb body

part in stock 1 in stock

£10.90

INC VAT

£9.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Cable

CAA18562 Fits T3 Cali (1980-1984), G5 (PHF Carbs), Convert (VHB Carbs)

Dimensions:
1160mm outer length, 97mm free length, 5.7mm barrel nipple, 2.9mm barrel nipple

Throttle cable

For models with twin pull 'Lego' switchgear

part in stock 2 in stock

18117562-z 18117562 GU18117562 18 11 75 62
1811 7562 1811.7562 18.11.75.62

£11.00

INC VAT

£9.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Cable

CAA17562 Fits 1000 SP (PHF 30 carbs)

Dimensions:
1010mm outer length, 120mm free length

Throttle cable, also suitable where PHF30 carbs are fitted to T3 and T4 models

only suitable for models with PHF 30 carbs. We advise you to measure your existing cable before ordering in case you have a non standard set up. Two cables required

Sorry this part is no longer available Sorry, this part is no longer available.

17117562 GU17117562 17 11 75 62
1711 7562 1711.7562 17.11.75.62

this part is no longer available
Sorry this item is out of production

Accelerator Pump Inlet Valve PHF Carbs

FUA14930 Fits Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, Convert, G5, Cali 2, Cali 3, Mille GT, Strada 1000, Cali 1100

Dimensions:
7mm thread, 13mm high

Dellorto accelerator pump inlet valve for PHF carbs

This part is available by special order, request a quote

£11.00

INC VAT

£9.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Air Filter UFI 2777900 conical

SIA17113 Fits T3, T4, 1000 SP, Convert, G5, V35 I, V35 II, V35 3, V35C, Imola, Imola II, V50 I, V50 II, V50C, V50 3, Monza, NTX 350, V35 Florida, V40 Capri

Dimensions:
approx 195mm x 75mm diameter at wide end

UFI 27 77 900 conical air filter

See FUA90552 for air filter housing O ring

part in stock More than 5 in stock

17113651 GU17113651 17 11 36 51
1711 3651 1711.3651 17.11.36.51

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Dellorto Mixture Screw Kit PHF36 and PHM

FUA60856 Fits 1100 Sport Carb, Cali 1100 (Carb), 850/1000 ALL Models

Dimensions:
5mm tip, 14mm shaft, 7mm threaded section

Dellorto mixture screw kit for PHM and PHF carbs

Check your mixture screw length as Guzzi used two lengths, this one and the screw in kit FUA93936

part in stock 4 in stock

30936210 GU30936210 30 93 62 10
3093 6210 3093.6210 30.93.62.10

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Sleeve Airbox to Carb

FUA14460 Fits Cali 2, Cali 3, Le Mans 3, Mille GT, Spada 3, T5, SP II, 1000S (PHF)

Dimensions:
66mm OD at airbox end, 45mm ID at carb

90 degree inlet sleeve from airbox to carb

Airbox inlet elbow. Use SSA32957 to clamp to carb

part in stock 2 in stock

14114460-z 14114460 GU14114460 14 11 44 60
1411 4460 1411.4460 14.11.44.60

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle cable

CAA29520 Fits Cali 2 (PHF carbs)

Dimensions:
1255mm outer length, 122mm free length, 5.7mm barrel nipple, 2.7mm barrel nipple

Throttle cable

We advise you to measure your existing cable before ordering in case you have a non standard set up. Two cables required per bike

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

29117520-z 29117520 GU29117520 29 11 75 20
2911 7520 2911.7520 29.11.75.20

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Carburettor Overhaul Kit Dellorto VHB

FUA17939 Fits V35 I, V35 II, Imola, V35C, V35 3, V35 TT, V50 I, V50 II, Nuovo Falcone, V7 Special (1969-1971), V7 700, 850 GT, G5, Cali 2, 1000 SP, T3, T4, 850T, V7 Sport, 750S, S3

Carb gasket kit / rebuild kit for Dellorto VHB29, VHB30, VHB24 and VHB26 carbs

Carb overhaul kit, fuel filter FUA60888 and float bowl seal FUA90001 available separately to this seal kit. As this kit is intended for several different carbs you may have gaskets or O rings remaining after rebuilding. More information on rebuilding your VHB carb can be found here.

part in stock More than 5 in stock

17939950 GU17939950 17 93 99 50
1793 9950 1793.9950 17.93.99.50

£12.50

INC VAT

£10.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 6 of 9

1 2 3 4 5 6 7 8 9